Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Installation for Tacoma Homeowners
Garage door installation in Tacoma typically costs $700-$2,200 depending on door size, material, and hardware selection, and every job starts with a free measure and a written, flat price before any work is scheduled. Since 2015, Servo Garage Doors has installed more than 18,000 garage doors across Pierce County under The Haven Standard, with every project documented from first measurement to final photo record. If your current door is sagging, rusted through, or you’re finishing a new build in neighborhoods like North End or Proctor, call (253) 666-6264 to book a free estimate - we’ll measure your opening, show you material samples, and deliver a written scope and price you can compare without pressure.
What Our Garage Door Installation Service Includes
New Door Installation
New door installation is the complete replacement of an existing garage door system or the first install on a newly constructed home, including the door sections, track assembly, spring system, and opener connection. In Tacoma, we see this most often on homes built between 1950 and 1990 where the original door has reached the end of its service life, or on new construction in areas like the Tacoma Mall vicinity and along the Ruston waterfront. Our technicians measure the rough opening to the quarter-inch, check headroom and sideroom clearance, and specify whether a standard torsion spring system or a low-headroom track configuration is required before any door is ordered.
Single Car Door Installation
A single car door typically spans 8 to 10 feet wide and 7 to 8 feet high, fitting the detached garages and narrow attached bays common in Tacoma’s historic Hilltop and Stadium District homes. These doors are lighter than double car units but still require proper spring sizing - an underspringed single door will strain the opener’s trolley carriage and burn out the motor prematurely. We stock common single door sizes in steel and wood composite options, and most installations in Tacoma’s older neighborhoods require us to address settled or out-of-plumb jambs before the new track goes in.
Double Car Door Installation
Double car doors range from 16 to 18 feet wide and demand heavier-duty track, spring, and opener specifications to handle the increased panel weight and wind load. In Tacoma’s newer subdivisions like those off 56th Street or in the Fern Hill area, these are standard on attached two-car garages, but the wide span makes them susceptible to panel bowing if the wrong spring wire diameter is specified. We calculate the door weight based on material and insulation package, then pair it with the correct torsion spring cycle rating - typically 10,000 cycles for standard use, 25,000 or higher for heavily trafficked doors.
Custom Garage Door Installation
Custom garage door installation covers non-standard sizes, specialty materials, and architect-specified designs that fall outside manufacturer stock programs - arched tops, carriage house overlays, full-view glass and aluminum, or oversized openings for RVs and workshop equipment. Tacoma’s hillside homes in the North Slope Historic District and custom builds on Fox Island often require these solutions, and the lead time runs 4 to 8 weeks depending on the manufacturer. We template the opening on-site, produce dimensioned drawings for your approval, and build the price from the confirmed specifications so there are no change orders once fabrication begins.
Steel Door Installation
Steel garage doors are the most common replacement choice in Tacoma, offering the best balance of durability, insulation value, and cost across a range of gauge thicknesses from 24-gauge (heaviest) to 28-gauge (lightest residential). The marine air coming off Commencement Bay accelerates surface corrosion on unprotected steel, so we specify galvanized or factory-applied polyester coating on all Tacoma installations, with optional vinyl back insulation for thermal performance. We carry steel door lines from Clopay and Amarr in raised panel, flush, and contemporary designs, and can show you physical samples during the estimate visit.
Wood Door Installation
Wood garage doors provide the authentic grain and weight that steel cannot replicate, and they remain popular on Craftsman bungalows in Tacoma’s North End and mid-century homes in the West Slope area where architectural consistency matters. These doors require more maintenance than steel - annual resealing is necessary in Tacoma’s wet winters - and the panel weight demands heavier spring and opener specifications. We source clear cedar and mahogany options with dowel-jointed construction, and we always verify that the existing header and jambs can support the static load before quoting, since wood doors can exceed 300 pounds on a double car opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Installation
We install and service equipment from all eight major garage door and opener manufacturers, and our technicians carry brand-specific training on each system’s quirks and warranty requirements. For Raynor doors, we’ve completed hundreds of installations in the South Sound and maintain direct supplier relationships for their Affinity and BuildMark residential lines, including the proprietary weatherseal systems that perform best in Tacoma’s wind-driven rain conditions. LiftMaster and Chamberlain opener systems are our most frequently specified units - we stock their belt-drive and chain-drive models, including the wall-mounted jackshaft openers that free up ceiling space in garages with limited headroom or storage racks installed.
Genie screw-drive and chain-drive openers remain common in Tacoma homes built in the 1990s and 2000s, and we carry replacement rail assemblies and logic boards for legacy models as well as current production units. Whether you have a Clopay gallery collection door, an Amarr stratford design, a Wayne Dalton TorqueMaster spring system, or a Craftsman opener from a big-box retailer, we can source compatible hardware and install to manufacturer specification. And if your brand isn’t listed here, we can still help - our inventory covers the full range of standard track, spring, and roller components that cross between manufacturers.
BeforeAfterSigns You Need Garage Door Installation Right Now
- The door panels are rusted through or delaminating. Surface rust can be sanded and repainted, but once steel panels develop pinholes or wood doors show glue-line separation between plies, structural integrity is compromised. In Tacoma’s climate, we see accelerated deterioration on doors facing Puget Sound or with failed weatherstripping that allows water to pool in the bottom section.
- The door has been hit and the section is creased or bowed. A single damaged panel can sometimes be replaced, but if the impact distorted the hinge locations or the track mounting points, the entire door system may be out of alignment. Continuing to operate a bent door stresses the opener trolley carriage and can strip the drive gear or snap the trolley chain.
- Your energy bills have risen and the garage is cold. Uninsulated or poorly sealed doors act as a thermal bridge, especially on attached garages where the shared wall bleeds heat into conditioned space. Modern steel doors with polyurethane foam core and thermal break construction can reduce heat loss significantly - we measure the existing door’s R-value during the estimate and specify the upgrade.
- The door is original to a 1970s or earlier home and has no safety features. Pre-1993 doors lack the photo-eye sensors and auto-reverse pressure sensitivity that federal law now requires. If your door cannot detect an obstruction and reverse, it is a liability hazard, and retrofitting old hardware to meet current standards often costs more than replacement.
- You’re selling the home and the door is the first thing buyers see. Curb appeal returns on garage door replacement consistently rank among the highest of any exterior renovation, and a dented, faded, or mismatched door signals deferred maintenance to prospective buyers. We can coordinate installation timing with your listing schedule and provide the documentation and warranty transfer paperwork that supports your disclosure.
Our Garage Door Installation Process - Step by Step
- 1
Free on-site measure and consultation. We arrive with a tape measure, level, and material sample kit. The technician checks the rough opening width and height, headroom clearance, sideroom, and backroom depth; notes whether the header is engineered lumber or dimensional; and identifies any settled or out-of-square conditions common in Tacoma’s clay-heavy soils. You’ll receive a written scope and flat price before we leave - Clause 1 of The Haven Standard.
- 2
Material and hardware selection. Based on the measurements and your preferences, we specify the door model, insulation package, window layout, track type, spring cycle rating, and opener horsepower. We explain the difference between chain, belt, and screw drive openers in one plain clause: chain is strongest and noisiest, belt is quieter for living spaces above the garage, screw drive requires the least maintenance but performs poorly in temperature extremes.
- 3
Order confirmation and scheduling. Custom or non-stock doors ship from the manufacturer; standard sizes are typically available within 5 to 10 business days. We schedule installation for a confirmed date and provide a two-hour arrival window, not an all-day wait. You’ll receive a text when the technician is en route with a name and photo.
- 4
Removal and installation. We disconnect and haul away the old door and hardware, inspect the header and jambs for rot or insect damage, install the new track and spring system with calibrated tension, hang the door sections, and connect the opener. The technician photographs each stage of the work for the documented photo record - Clause 4 of The Haven Standard.
- 5
Testing, documentation, and walkthrough. We cycle the door 20 times, test the safety reverse under load, check the photo-eye alignment, and verify the limit switch settings so the door stops fully open and fully closed. You receive the photo record, the written warranty, and the final invoice matching the quoted price. The 365-Day Done Right Promise begins at this moment.
How Much Does Garage Door Installation Cost in Tacoma?
A typical new door installation in Tacoma runs $700-$2,200 depending on door width, material, insulation level, and hardware selection - see our Garage Door Installation cost guide for full details. Single car steel doors with no insulation and a basic chain-drive opener sit at the lower end of this range; double car custom wood doors with high-cycle springs, belt-drive openers, and glass panel inserts reach the upper end. Custom garage door installation for non-standard sizes or specialty materials falls outside this range and is quoted individually after on-site templating.
Several factors move the price within this band. Door material is the largest variable: 25-gauge uninsulated steel costs least, while clear cedar or mahogany with carriage house overlay costs most. Insulation adds $150-$400 depending on the door size and whether you choose polystyrene or higher-R polyurethane. Opener upgrades - from chain to belt drive, or from ceiling-mount to wall-mount jackshaft - add $200-$400. Window sections, decorative hardware, and specialty colors or wood grain finishes each increment the total.
To avoid overpaying, compare written scopes line by line, not just bottom-line totals. Some Tacoma contractors quote a low door price and add track, springs, and installation as extras; our price is flat and includes everything required for a complete, code-compliant installation. The free estimate covers the measure, the specification, and the written quote - no deposit, no obligation, no expiration pressure.
What’s included: removal and disposal of the old door, new track and spring system, door section installation, opener connection and programming, safety testing, cleanup, and the documented photo record. What’s not included: structural repairs to the header or jambs, electrical outlet installation for the opener, or painting - these are quoted separately if needed.
Garage Door Installation Near Tacoma - Our Service Area
We install garage doors throughout the Tacoma metro and surrounding communities, with typical scheduling availability within one to two weeks for standard sizes and three to four weeks for custom orders. Our service area includes Garage Door Installation in Federal Way to the north, Garage Door Installation in Lakewood to the south, and extends to Edgewood, Gig Harbor, Puyallup, Sumner, Auburn, South Hill, Bonney Lake, Kent, and SeaTac. Travel beyond this radius is available for custom projects by arrangement. If you’re unsure whether your address falls within our standard service area, call (253) 666-6264 and we’ll confirm scheduling and any travel considerations.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Installation in Tacoma
Garage Door Installation - Tacoma is the complete fitting of a new door system including the door sections, track assembly, spring hardware, and opener connection, either as a replacement or on new construction. At Servo Garage Doors, this begins with a free on-site measure and ends with a tested, warranted system and a documented photo record of the completed work. Every installation is quoted with a flat, written price before scheduling - Clause 1 of The Haven Standard.
A standard single or double car door replacement takes 3 to 5 hours from removal of the old door to final testing and cleanup. Custom installations or jobs requiring structural repairs to the header or jambs may extend to a full day. We schedule a confirmed date with a two-hour arrival window, not an open-ended appointment, and you’ll receive a text when the technician is on the way.
Garage door installation in Tacoma typically costs $700-$2,200 for standard residential doors, with the final price depending on door size, material, insulation, and opener selection. Custom doors and non-standard sizes are quoted individually after measurement. Call (253) 666-6264 for a free estimate - we’ll measure your opening and deliver a written, flat price you can compare.
Yes, we are experienced with both Raynor and LiftMaster systems and maintain supplier relationships for their full residential product lines. For Raynor, we install their Affinity, BuildMark, and Distinction series with factory-specified hardware; for LiftMaster, we stock and install their belt-drive, chain-drive, and wall-mount jackshaft openers with MyQ connectivity options. We also service and install Chamberlain and Genie equipment.
Emergency service is available 24/7 for situations where a door is inoperable and the opening is unsecured, but full installation requires measurement, ordering, and scheduling that cannot be completed same-day. If your door has failed completely, we can secure the opening with a temporary panel or board-up and expedite the installation order. Call (253) 666-6264 any time - a live person answers, including holidays.
Every installation is backed by our 365-Day Done Right Promise: if anything is not right, we make it right with no charge for the callback. This is documented in your warranty packet, not offered as a verbal assurance. Manufacturer warranties on the door sections, springs, and opener apply in addition to our promise, and we handle the warranty registration paperwork for you.
Clear vehicles, storage items, and obstructions from the garage bay and at least 3 feet of workspace around the door opening on all sides. Ensure electrical power is available for the opener installation, and verify that we have access to the garage if you will not be present. If you have questions about clearance requirements or electrical specifications, call (253) 666-6264 before your scheduled date and we’ll walk through it.
Schedule Your Garage Door Installation Service in Tacoma Today
Call (253) 666-6264 to book your free measure and written estimate. A live person answers 24 hours a day, including weekends and holidays. We’ll confirm a two-hour arrival window, measure your opening to specification, and deliver a flat price and scope before any work is scheduled. No deposit, no obligation, no pressure - just the documentation and transparency that The Haven Standard requires.
Written by Marcus Deller, Owner at Servo Garage Doors, serving Tacoma since 2015.